Blog
Discover our latest articles and blogs
Order State Compliant Decals: 3 Inch Documented Vessel Lettering Size
Order state compliant boat decals: checklist to meet the 3 inch minimum, place the validation sticker within 6 inches, and use plain block letters for...
Boat Decals: Clean, Compliant Sets in 3–5 Days for Owners & Dealers
Order marine grade, inspection-ready boat decals for owners, marinas, and dealers. Preview your number, confirm sizing, and receive compliant sets in 3 to...
65°F Minimum: Install Winter Boat Decals That Won't Curl
Follow the 65°F rule for winter boat decal installs. Learn cold-weather prep, step-by-step application, and storage protections; expect a 48-hour cure and...
Align Boat Numbers to 33 CFR 173.27 Using Wet or Dry Methods
Use the 3 inch federal rule (33 CFR 173.27), wet or dry application steps, and decal checks to align boat numbers that pass U.S. inspections.
45–60 Day Temps: Dealers' Boat Numbers Process and Decal Steps
U.S. dealers: follow a dealer‑ready checklist to issue compliant 45–60 day temporary boat numbers, log decal control and filings, and install marine‑grade...
3 inch Minimum: Curved Hull Numbers That Pass U.S. Inspections
U.S. boat owners: ensure curved registration numbers meet the 3 inch federal minimum. Measure curvature, choose marine grade vinyl, and use a backing plate.
Get Decals to Stick at 41°F: Installer Playbook for Cold Weather
Field-ready playbook for installers: which films stick at 41°F, how to warm vinyl and substrates, firm squeegee technique, and 24 to 48 hours cure rules.
Keep Cast Vinyl Stuck on Aluminum Boats: Rivets, Curves, Order Specs
Learn why cast marine-grade vinyl plus proper prep and rivet-by-rivet installs keep decals stuck to aluminum boats. Includes curve handling and ordering...
Start Gentle: Remove Adhesive From Gelcoat Without Dulling the Finish
Follow a marine-first workflow: soap and water, 10–15 seconds of gentle heat, plastic scraping, test Re-Mov or BoatLife, then wash, polish, and re-wax to...